USED PLANERS
Click on the Number to get more information.
| Number |
Qty. |
Description - Sorted by Manufacturers Click on Photo for enlargement |
Photo |
| 1542 |
1 |
COASTAL PLANER 6"X9" W/PROFILES, INFEED, BRIDGE, & SLOW DOWN BELT, HPU, & PARTS & SIDE HEAD GRINDER (STUD MILL) 14" ROLLS, 16 KNIVES |
 |
| 1840 |
1
|
NEWMAN MODEL #8-B PLANER, MATCHER, & MOLDER WITH 24" TOP & BOTTOM HEADS, 4" SIDE HEADS, 20HP T&B, 15HP SIDE HEADS, 5HP DRIVE W/SPARE MOTORS W/24 SETS SPARE KNIVES W/CORNELL BLOWER #A26-ALO, BED DROPS 8" IF TWO SIDING, CAPABLE OF 1" & 2" T&G |
available upon request |
| 1753 |
1
|
NEWMAN MODEL S382 DOUBLE SIDED ROUGHING PLANER - 1976 MODEL WITH HELICAL HEADS, S/N 13671 INCLUDES INFEED TABLE 3' WIDE X 15' LONG. |
available upon request |
| 1754 |
1
|
NEWMAN #S382 DOUBLE SIDED ROUGHING PLANER - 1993 MODEL PLANER IN EXCELLENT CONDITION. PLANES LUMBER ON 2 SIDES UP TO 6" THICK. OPENING WIDTH IS 30". FEEDS FROM 80 TO 300 FEET/MIN. FEATURES HELICAL "QUIET CUT" CARBIDE HEADS FOR LONG RUN TIMES BETWEEN SHARPENING AND LOW NOISE. 75HP TOP HEAD, 40HP BOTTOM HEAD. HYDRAULIC VARIABLE SPEED INFEED/OUTFEED, HOODS, CONTROL PANEL, STARTERS, "ACC" AUTOMATIC UT CONTROL,GRINDER & JOINTER FOR HELICIAL HEADS. |
|
| 1436 |
1 |
NEWMAN PLANER INFEED MODEL M255 |
|
| 1473 |
1 |
PLANER INFEED TABLE WITH HYDRAULIC
DRIVE & BELTS ROLL TO ROLL (unknown Manufacturer) |
|
| 1727 |
1 |
STETSON ROSS 6-10A-1 PLANER 15" WITH PROFILES |
Request |
| 1636 |
1
|
STETSON ROSS MODEL 6-12A-1 PLANER WITH PROFILES, 12 KNIFE, 25" WIDE MACHINE WITH INFEED & OUTFEED |
 |
| 1557 |
1
|
STETSON ROSS MODEL 6-12C-1 PLANER 16 KNIFE 15" MACHINE WITH OUTFEED, 12' BRIDGE |
 |
| 1065 |
1
|
STETSON ROSS MODEL 6-12MA-1 WITH INFEED, OUTFEED, FILING ROOM, SHAVINGS BINS, PACKAGE SAW, BREAKDOWN HOIST, QM R.H. TRIMMER, PULL CHAIN & CARTS. |
|
| 1655 |
1
|
STETSON ROSS MODEL 6-14C-1 PLANER FOUR (4) HEAD, 16 KNIFE, 25" MACHINE WITH INFEED TABLE, BRIDGE, BREAK DOWN, & OUTFEED |
|
| 1662 |
1
|
STETSON ROSS MODEL 6-14D PLANER 20 KNIFE TOP & BOTTOM HEADS, 16 KNIFE SIDE HEADS, TOP, BOTTOM, LEFT SIDE HEAD HAVE 85HP MOTORS, RIGHT SIDE HEAD IS 35HP, BRIDGE, INFEED, & SLOWDOWN. COMPLETE, INFEED BREAKDOWN HOIST, MSR, TRIMMER, 7 TRAY SORTER & STACKER, & PACKAGE MAKING SYSTEM. |
|
| 1181 |
1
|
STETSON ROSS MODEL 6-14D-1 FOUR HEAD PLANER SERIAL #5077 - TOP & BOTTOM HEADS = 16 KNIFE & SIDE HEADS = 14 KNIVES, COMPLETE WITH COASTAL INFEED TABLE (NO SERIAL NO. OR MODEL NO.) & HPU |
|
| 1654 |
1
|
STETSON ROSS MODEL 6-16K NARROW LUMBER PLANER, 200 LPM AT 1800FT/MIN (8 FOOT) C/W REBUILT HYDRAULIC HPU, 3 SETS OF TOP AND BOTTOM HEAD (32 KNIVES, 250HP TOP HEAD, 75HP BOTTOM HEAD0, 3 SETS OF SIDE HEAD (32K, 75HP OUTSIDE HEAD, 40HP INSIDE HEAD), FEED ROLL AT 5.5", LIVE ROLL BRIDGE OF 6", LUMBER ACCELERATOR ROLL OF 6". ALSO AVAILABLE (EXTRA) CNC SETWORKS SYSTEM & CON-VEY KEYSTONE CONTINUOUS FEED BREAKDOWN |
|
| 1183 |
1
|
STETSON ROSS MODEL 7A STUD PLANER EIGHT (8) KNIFE WITH INFEED & OUTFEED |
|
| 1643 |
1
|
STETSON ROSS PLANER INFEED TABLE, PULLEY ROLL DRIVE, HYDRAULIC DRIVE WITH HPU BUILT IN. SIX (6) 10" ROLLS X 30" WIDE, 34" C/C, 20' OAL, SIX (6) 24" DIA. SPROCKETS ON HEAD SHAFT, 10" DIA. PINEAPPLES (2) & (1) SMOOTH ROLL. |
|
| 1585 |
1 |
STETSON ROSS TIMBER MACHINE THAT HAS CAPACITY OF 20"HIGH X 30" WIDE. THE TOP HEAD HAS TWO MOTORS, ONE ON EACH END OF THE CUTTING HEAD SHAFT. THE BOTTOM HEAD HAS A SINGLE 50HP MOTOR. THE SIDE HEAD FRAMES HAVE THE CAPACITY FOR 20" HEADS BUT THE MACHINE IS EQUIPED WITH 6" HEADS, THE TOP AND BOTTOM HEADS ARE 30" WIDE. |
|
| 1172 |
1 |
WOODS MODEL 407M PLANER 8 KNIFE HEADS 15" WIDE W/INFEED TABLE AND SPARE HEADS |
|
| 1235 |
1 |
WOODS MODEL 409 PLANER |
Request |
| 1644 |
1 |
WOODS MODEL 414M PLANER FOUR (4) HEAD, 14 KNIFE, INFEED, OUTFEED, & SPARES, HYDRAULIC VARIABLE SPEED TO 720'/MIN. |
|
| 1663 |
1 |
WOODS MODEL 415 M2 - 20" PLANER/MATCHER SERIAL 32385 12KNIFE W/SPARES |
|
| 1758 |
1 |
WOODS MODEL 415M PLANER WITH INFEED & BRIDGE |
|
| 1693 |
1 |
WOODS TWO SIDED SURFACER 6" X 30" |
Request |
| 1692 |
1 |
YATES - BERLIN 10"X20" TIMBER SIZER - 4 KNIFE |
|
| 1656 |
1 |
YATES A-20 PLANER 8 EIGHT KNIFE, BELT DRIVE |
 |
| 1254 |
1 |
YATES A-20 PLANER W/PROFILES W/NEWMAN
INFEED (BELT DRIVE) |
 |
| 1826 |
1 |
YATES A20-12 PLANER 4 HEAD W/EIGHT (8) KNIVES |
Request |
| 1233 |
1 |
YATES A-62 PLANER "PARTS MACHINE" BELT DRIVE W/SPARES |
Request |
| 1064 |
1 |
YATES A-62 PLANER, 12 KNIFE, 100HP TOP, 50HP BOTTOM, 40HP & 30HP SIDE HEADS WITH ORBIT MOTORS ON TOP INFEED PRESS ROLLS AND OUTFEED PRESS ROLLS. INCLUDES INFEED ROLL CASE. |
 |
| 1587 |
1 |
YATES A-63 PLANER 15" MACHINE, 16 KNIFE TOP & BOTTOM, 12 KNIFE SIDE HEADS, 6'" CAPACITY 4" TO 12" WIDE, 6' TO 20' LONG, COMPLETE SYSTEM TO INCLUDE BREAKDOWN HOIST, CHAINS, INFEED, BRIDGE, OUTFEED, SLOWDOWN, GRADING STATION, TRIMMER, & STACKER SYSTEM |
 |
| 1429 |
1 |
YATES AMERICAN TIMBER SIZER 16"X20", INCLUDES INFEED DECK, ROLLCASE, OUTFEED ROLL CASE, TRANSFER, TRIM LINE WITH SAW, FROM 6' TO 30' STOPS, PNEUMATIC LOW PRESSURE DUST SYSTEM, AND ELECTRICAL SERVICE SYSTEM (INCLUDES SPARE FRAME & ROLLS FOR YATES) |
 |
| 1493 |
1 |
YATES MODEL B24-12 TWO SIDE SURFACER 8" X 30" CAPACITY (TWO 35HP TOP HEAD ONE 35HP BOTTOM) 12 KNIFE W/TWO (2) SPARE ARBORS |
 |
| 1492 |
1 |
YATES TWO SIDED RESURFACER 12" X 60" |
 |
